|
|
|
|
ITW
Dynatec Adhesive Equipment
Drum
Unloader Adhesive Melter-The DM55 DynaDrumTM bulk adhesive melter provides
uninterrupted flow of hot melt adhesive for high volumeproduction demands. Daily
operations are simplified with the DM55 DynaDrum’s standard features which
include field-interchangeable platen faces, a touch screen PLC,
self-diagnostics, and low/empty drum indicators Slot
Die Applicator- Precise high speed
intermittent adhesive patterns. Self-cleaning die lips permitsthe use of a
variety of adhesive viscosities. APEX™ SB module with recirculation provides a
clean adhesive cutoff regardless of the adhesive pattern. Cold Glue Applicator- The DynaCold Mini is a smaller, lighter-weight version of our reknown DynaCold Series high-speed electrical application heads. The "Mini" retains all the capabilities of its larger sibling while providing more flexible installation options. Click here to view brochure Fiberized Spray Pattern Controllers- 2 Channels,4 Patterns per Channel.Memory for 12 Programs Distance-Based, Time-Based and Driver Modes. Trigger Inputs for Each Channel. Production Counter Click here to view brochure Stackable UFD Applicator- Build up to 200 ports, Integrated basket filters, Multi-Module design,Verticle , Horizontal, Continuous, Intermittent, Slot-Die and Snuffback,Precise Control Of Adhesive, Five standard Equity UFD models 6 port, 8 port, 10 port,, 12 port, 14 port can be combined to create a custom length. ITW Dynatec’s DynaControl or PLC controls,Air Pre-heater, Supplies heated air (Process Air), used to, fiberize the adhesive streams, to the modules. Click here to view brochure. Dynamelt D Series Adhesive Supply Unit-Dynamelt D Series is available in four hopper sizes and with a choice of dual or single gear pumps. The ASU uses a microprocessor temperature control to closely control the temperature of hot melt adhesive for up to eight hose standard and precision metered outputs. Click here to view brochure. APEX High Speed Slot Die- Precise high speed intermittent adhesive patterns. Self-cleaning die lips permits the use of a variety of adhesive viscosities. Exceptional value for a high speed slot die applicator.Slot die design does not require micro adjustments to achieve the required adhesive lay down weights. APEX™ SB module with recirculation provides a clean adhesive cutoff regardless of the adhesive pattern. Click here to view brochure.
Dynamelt M Series Adhesive Supply Unit-The
Dynamelt M Series hot melt adhesive supply units are PLC-based and provide
accurate, proportionate temperature control for the hopper, hoses and
applicators. The M Series units are available in three cabinet sizes and offer
four hopper sizes. Temperature set points are operator-selected for up to 16
zones. UFD-HS High Speed Applicators-HS-Series Applicators™ shown with quick-change UFD-HS Nozzles™ featuring patented Omega™ and Random Fiber™ patterns with partial configurations. Click here to view brochure. Small hot melt unit which has been designed for optimal performance, reliability and simplified daily operations. it can be installed on a cart. Click here to view brochure.DPC-2 Adhesive Pattern Controller-Hot-Melt or Cold Glue System Compatible Distance Based 2 Channel Controller “On-the-Fly” Program Adjustments 4 Glue Pattern Events Per Channel 4 Program Memory Retention Click here to view brochure. DY 2002 Pattern Controller-2 Channels, 4 Patterns per Channel. Memory for 12 Programs. Distance-Based, Time-Based and Driver Modes. Trigger Inputs for Each Channel Programmable Pressure Run-Up Click here to view brochure. DY 2008 Pattern Controller- 4 to 128 Channels. 16 Patterns per Channel. Trigger Inputs for Each Channel. 4 Pressure Outputs. 4 Scalable Machine Speed Inputs. 55VDC or 170VDC Over-Excitation. Easy-to-Navigate Menu Structure. Memory for 60 Programs. Click here to view brochure. Fluid
Delivery System-Pre-Assembled 1:1. Diaphragm
Pump/Filter/. Fluid Regulator.
Built-In By-Pass.
0 to 80 psi Fluid Pressure.
Fluid Pressure Regulation via Air Pilot.
Suitable for Most Glues to 1500 cps.Stainless
Steel & Inert. Plastics Wetted Parts
Click here to view brochure. You are also welcome to call 1-800-323-5158 for more information
|
