NewLoctiteGuns

      THE HOT MELT CENTER
         940 Telser Road, Lake Zurich, IL 60047
      Hot Lines 1-800-323-5158 01-847-437-7773(Outside U.S. /Canada)

                                                                   SPECIAL PROMOTIONS     NEW PRODUCTS   BUY HOT MELTS&GLUE GUNS     EMAIL HELP                                                                                                            TECHNICIAN TO CALL YOU

Click button if
you wish us to
phone you.

Our Facilities
Serving You

LOCTITE-HYSOL HAND HELD HOT MELT APPLICATORS-
Manual Applicators Pneumatic Applicators
ORDER DIRECT AT FACTORY PRICESYou don't have to pay full price for your Hot Melt Glue Guns and Hot Melt Adhesives. Order direct by going to: HOT MELT DIRECT.COM where, ON LINE you can order top quality brand name hot melts and dispensers at factory direct prices.
NOTE:You can order the following applicators immediately by clicking on the order buttons below after choosing the desired number of applicators you wish to order.

Manual Applicators-CLICK ON PHOTOS FOR LARGE VIEW OF APPLICATORS

Loctite-Hysol® 050
Hot Melt Applicator
1-4 $90.00 each
5-9 $87.50 each
10+ $85.00 each

Quantity

The Hysol® 050 is an industrial grade,
hand-held hot melt applicator used for
dispensing 0.50” diameter EVA sticks. The operating temperature of the unit is set at 195°C.

The dispense quantity and timing are manually controlled with the trigger mechanism.

A wire hanger and dispenser stand are included
as part of the system. For complete technical
specifications, click the “datasheet” button
above.
This new model replaces Hysol 2000
OPERATION MANUAL DATA SHEET

Loctite-Hysol® 075-LT
Hot Melt Applicator
1-4 $191.85 each
5-9 $182.81 each
10+ $175.50 each
Quantity

The Hysol® 075-LT is an industrial
grade, hand-held hot melt applicator used for dispensing 0.75” diameter Coolmelt® EVA sticks. The operating temperature of the unit is
set at 121°C, which reduces the risk of operator
burns vs. conventional applicators. The dispense
quantity and timing are manually controlled with
the trigger mechanism. A high adhesive dispense
rate and large adhesive loading capacity are the
trademarks of this applicator. A dispenser stand
and speed loader are included as part of the system.
This new model replaces Maximatic 2810CoolTool
OPERATION MANUAL DATA SHEET

The Loctite-Hysol® 075
1-4 $191.95 each
5-9 $182.81 each
10+ $175.50 each

This is an industrial grade,
hand-held hot melt applicator used for
dispensing 0.75” diameter EVA sticks. The
operating temperature of the unit is set at
182°C. The dispense quantity and timing are
manually controlled with the trigger mechanism.
A high adhesive dispense rate and large
adhesive loading capacity are the trademarks of
this applicator. A dispenser stand and speed
loader are included as part of the system.
This new model replaces the Maximatic2710

OPERATION MANUAL DATA SHEET
To order use buttons above or call Order Desk 1-800-323-5158

The Loctite-Hysol® 175
1-4 $305.16 each
5-9 $290.63 each
10+ $279.00 each

An industrial grade,hand-held hot melt applicator used for
dispensing 1.75” diameter EVA and polyamide
sticks. The system includes a plug in thermostat at 195°C for EVA hot melts and a plug in thermostat at 215°C for polyamide hot melts.
The dispense quantity and timing are manually
controlled with the trigger mechanism. A
dispenser stand is also included as part of the
system.
This new model replaces the Hysol 3200

OPERATION MANUAL DATA SHEET

Pneumatic Applicators-CLICK ON PHOTOS FOR LARGE VIEW OF APPLICATORS

The Loctite-Hysol® 175 AIR Hot Melt Applicator.
1-4 $718.59 each
5-9 $684.38 each
10+ $657.00 each

Quantity

The Hysol® 175-AIR is an industrial grade,
hand-held pneumatic hot melt applicator used for dispensing 1.75” diameter EVA sticks. The operating temperature of the unit is set at195°C. The dispense rate is controlled by the
air pressure, and the timing is controlled by the
trigger mechanism. Pneumatically powered
dispensing reduces operator fatigue. A high
adhesive dispense rate and large adhesive
loading capacity are the trademarks of this
applicator. A dispenser stand is included as part
of the system.
This new model replaces the Hysol 4010, 4000, 4100. Also available in higher temperature as the Hysol175-Air-HT
OPERATION MANUAL DATA SHEET

The LoctiteHysol® 175-AIR-HT
1-4 $718.59 each
5-9 $684.38 each
10+ $657.00 each

OPERATION MANUAL DATA SHEET

The Loctite-Hysol® 175-SPRAY
1-4 $910.55 each
5-9 $867.19 each
10+ $832.50 each
Quantity

An industrial grade,
hand-held pneumatic hot melt applicator used
for dispensing 1.75” diameter EVA sticks. The
operating temperature of the unit is set at
180°C. By using the air adjustment control, the
dispense pattern can be varied from a narrow to
a wide spiral spray pattern. The dispense
quantity and timing are manually controlled with
the trigger mechanism. Pneumatically powered
dispensing reduces operator fatigue. A
dispenser stand is included as part of the system.
This new model replaces the Hysol 4210 Spray Tool.
Also available in higher temperature as the Hysol 175-Spray-HT
OPERATION MANUAL DATA SHEET
To order use buttons above or call Order Desk 1-800-323-5158

Loctite-Hysol® 175-SPRAY-HT
1-4 $910.55 each
5-9 $867.19 each
10+$832.50 each

Quantity

An industrial grade, hand-held pneumatic hot melt applicator
used for dispensing 1.75” diameter polyamide
sticks. The operating temperature of the unit is set at 195°C. By using the air adjustment control, the dispense pattern can be varied from a narrow to a wide spiral spray pattern. The dispense quantity and timing are manually
controlled with the trigger mechanism.
Pneumatically powered dispensing reduces
operator fatigue. A dispenser stand is included
as part of the system.

OPERATION MANUAL DATA SHEET

TO LOCTITE HYSOL HOT MELT ADHESIVE PRICES