Compare
these prices to traditional glue guns!
POWER
ADHESIVES 810-12 HOT MELT GLUE GUN -
EXCLUSIVE Only from Power Glue Guns
Uses
1/2" x 12" Hot Melt Sticks $113.02
BUYThe
810-12 is a 1/2" Glue Gun that is considered a heavy
duty mid-range glue gun for an economical price!!!Very fast warm up time in
2 to 3 minutes with and impressive output of over 4 lbs. of glue per hour.
Illuminated on-off switch, 300W stainless steel cartridge, trigger stroke
adjustment screw and a full hand level trigger with soft feel grip make this
a great glue gun for all of your applications that require a 1/2" glue stick!
POWER
ADHESIVES TEC 3200 Manual HOT MELT GLUE GUN
Uses
1 3/4" x 1 3/4" Hot Melt Cartridges
$352.74
BUYThe
TEC 3200 is just needs to be plugged in and used,
no need for an airline to be hooked up. This gun is great for product assembly,
packaging,sealing and electrical potting and encapsulation. The TEC 3200 can be
left on
for long periods of time without having to worry about the glue overheating,
this gun will
actually switch to a lower temperature and automatically return to full
operating temperature
when used.
There is a 400 watt stainless steel heater cartridge for a quick 4 minute
warm-up time and
capable of dispensing up to 8 lbs. of glue per hour
while only weighing in at 2.5 lbs.
POWER ADHESIVES TEC 6100
Pneumatic HOT MELT GLUE GUN
Uses
1 3/4" x 1 3/4" Hot Melt Cartridges
$722.60
BUYThe
TEC 6100 is a highly effcient dispenser using twin 250 watt
stainless steel heaters, which provides a quick 5 minute warm-up time
and weighs in at only 3 lbs. This dispenser is capable of dispensing up to 11
lbs.
of glue per hour for the most demanding of applications.
The TEC 6100 features a fully enclosed heater housing with silicon rubber nozzle
shroud,
A special non-stick coated piston for easy loading and to reduce glue meltback
and also has
an audible and visual indicator for reloading to minimize downtime. The gun
ships complete
with an integral dispenser stand, suspension ring, instruction booklet and 1
year warranty
POWER
ADHESIVES TEC 6300 Pneumatic
SPRAY HOT MELT GLUE GUN
Uses
1 3/4" x 1 3/4" Hot Melt Cartridges
$802.55
BUY
The TEC 6300 is a unique economical spray applicator. It only takes 10
minutes to
warm up with a 500 watt heated melt chamber.
The adhesive output is controlled by adjusting the air pressure and the spray
pattern
is controlled by using the rear mounted spray control knob.
This gun weighs in at only 3 lbs. and can dispense up to 10 lbs. of glue per
hour.
It is the perfect gun for covering areas up to about 10 square feet at a time.
This gun can also be used on heat sensitive substrates such as expanded
polystyrene and
other kinds of plastic foams.
POWER ADHESIVES TEC 7100
Pneumatic
SPEED-LOADING HOT MELT GLUE GUN
Uses
1 3/4" x 1 3/4" Hot Melt Cartridges
$987.14
BUYThe
TEC 7100 is a serious alternative to bulk hotmelt systems
at a fraction of the cost.
The most unique feature on this gun is a built-in speed loader on top which
holds an extra
2 polyshots in reserve. This gun also has dual 500 watt heaters (1,000 watts
total) with a 4 minute
warm-up time. When the trigger is pulled for use, the second 500 watt heater
starts to operate
and enables the hot melt to be dispensed at a constant temperature.
This gun also has a built in stand and weighs in at only 3 lbs. while able to
dispense up to
11 lbs. of glue per hou
CLICK HERE
FOR HOT MELT PRICES AT OUR
HOT MELT DIRECT STORE
THE HOT MELT CENTER
